Table of Content
They will also adjust the effort belt for you. Use the instructions in this section to help remember how to put on the sensors at home. One end of the effort belt should already be attached to the testing device. To end your HSAT, take off the sensors and disconnect them from the Alice NightOne device. Put the Alice NightOne device and sensors back into the carrying case.
Take several breaths with the nasal cannula in place. The nasal cannula icon on the device should turn green. If it doesn’t, make sure the prongs are inside your nostrils.
The North American Dental Sleep Symposium 2023
Put the rubber sensor on one of your index fingers . Twist the cannula clockwise to connect it to the top of the Alice NightOne device . It will measure how much air you’re breathing and keep track of your snoring.
Alice NightOne also provides the data necessary to differentiate between obstructive, central, and positional sleep apnea. The Philips Alice NightOne is an easy to use home sleep testing device designed to help patients get their sleep study done right the first night. Alice NightOne is built with minimal sensors and intuitive icons to ensure easy use for patients. Step by step instructions are provided to reduce the chance of error and keep it simple for patients.
Putting On The Sensors
Put the rubber sensor on one of your index fingers .The pulse oximeter only works on a natural, clean nail. This is a rectangular device that will keep track of your body position (information such as whether you’re lying on your back, side, or stomach). It will also store all the information from your HSAT. The Philips Alice NightOne makes sleep apnea testing easier and faster than it ever has been before.
You will only use these if the batteries inside the Alice NightOne device stop working.
About the Alice NightOne device icons
This helps reduce frustration, postage costs, and waiting times. Once you receive the results of the test, you’ll be able to understand what your patient’s sleep cycles looks like. This empowers you to provide them with the best treatment possible for any sleep disorders they may have.
Making signals to look like laboratory signals is not really that hard of a stretch. If Alice is able to open EDF files, then it should have the ability to view any EDF file as good as the signals from the laboratory. I had Compumedics Profusion displaying the Sompte’ HSAT units back in the 2009.
Alice NightOne: Home Sleep Testing Done Right
The good study indicator can tell you how how much of the data from your HSAT is good quality. It also tells you when the Alice NightOne device is turning on or off. The 4 parts of the good study indicator can light up separately. Had mine for about two week now and used it for multiple studies.
The integrated connection eliminates the need for an external effort wire set. The “smart guide” sequence guides patients through the setup process easily and provides feedback to the patient along the way. The indicators will change from yellow to green when a good quality signal is detected. The device uses the same sensors recommended by the AASM for in-lab studies.
Bluetooth Connectivity – connect to therapy devices easily. If only 1 part of the good study indicator is green, 25% of the data collected is good quality. Bring the case, device, and sensors back to the Memorial Sloan Kettering location where you picked them up.
Your sleep data will interpreted by a board-certified sleep doctor with over 14 years of experience in the field. Philips Respironics just unveiled the Alice NightOne, an at home sleep testing device. The user button is the round button on the front of the Alice NightOne device.
Breathe through your nose for 10 seconds, then check the icon again. Once the nasal cannula icon turns green, put on the pulse oximeter. The pulse oximeter icon will appear to remind you. Flow, effort and SpO2 signal quality is monitored throughout the night. In the morning, your patient can press the User Button and the GSI visually displays the amount of good-quality data in 25-percent increments. If a problem with a sensor significantly hinders the collection of good data, this is also displayed.
I had mine with minutes of returning the unit. Vitalistics™ is an Independent Diagnostic Testing Facility . We provide Home Sleep Testing services nationally. Our services also include Pulse-Oximetry testing which is home delivered by a DME/HME; primarily used to qualify patients for home oxygen treatment. All testing services are designed to comply with Medicare guidelines.
This information explains how to use an Alice NightOne device for your home sleep apnea test . Alice NightOne is a medical device with sensors that’s used to diagnose obstructive sleep apnea . Your home sleep test has 3 sensors to setup before you go to bed. Forward Healthcare is committed to helping patients get a better night’s sleep.
That said, Alice NightOne does need to be sent back to the lab, much like the WatchPAT® 300. If you’re interested in a disposable test, your organization may be a better fit for the WatchPAT® One devices. The good study indicator will be displayed on top of the Alice NightOne device.
No comments:
Post a Comment